GB/T31125 Loop Tack Tester FTM9 FINAT Adhesion Test
Loop Tack Tester FTM9 FINAT Adhesion Test Equipment ASTM D6195
Introduction:Loop tack tester is used to test the initial adhesion value of adhesives, labels, tapes, protective films, etc. Different from the steel ball test method of initial viscosity, this equipment accurately measure the initial adhesion force value.
Principle : After the ring sample is completely in contact with the standard float glass test plate at a constant speed of 300mm/min, the ring initial viscosity tester automatically reverses the ring sample and the test plate to completely separate the ring sample and the test plate at a constant speed of 300mm/min. The maximum force, this maximum force value is the ring initial viscosity of the tested sample.
Meet Standards : Standards: FINAT FTM9,PSTC-16,ASTM D6195-03s,GB/T 31125
Main Technical Parameters :
| Model Name | PT-6098 Loop Tack Tester FTM9 FINAT Adhesion Test Equipment ASTM D6195 |
| Measure Range | 0-500N |
| Force Accuracy | + / - 1% |
| Test Result | record the maximum tensile force required for ring sample to break away from the stainless steel test plate and the failure mode of the sample |
| Test Speed | 0.5～300mm/min |
| Speed Accuracy | better than 1% |
| Specimen Size | 175mm x 24mm; |
| Test Board Size | 150.0mm x 24.0mm x 2.0mm |
| Machine Size | 450 x 280 x 680mm(W x D x H) |
| Machine Weight | About 25kg |
| Power Supply | 220V,50Hz |
Loop Tack Testing Machine Detail Photos :
